American Journal of Engineering and Applied Sciences

Call for Papers

This special issue devoted to the integrated study of nanotechnologies and biomedical systems (from earliest times to the present day) will be published to give researchers appreciation of where the discipline has come from. We aim to provide an advanced forum for studies related to the proposed fields with all topics below. The objective of this special issue is to present recent advances and emerging cross-disciplinary approaches in the field of nanotechnologies, biomedical and medical engineering. Nanoscale science and technology, often spoken of as "nanoscience" or "nanotechnology", are simply science and engineering carried out on the nanometer scale, that is, 10-9 meters. In the last two decades, researchers began developing the ability to manipulate matter at the level of single atoms and small groups of atoms and to characterize the properties of materials and systems at that scale. This capability has led to the astonishing discovery that clusters of small numbers of atoms or molecules-nanoscale clusters-often have properties (such as strength, electrical resistivity and conductivity, and optical absorption) that are significantly different from the properties of the same matter at either the single-molecule scale or the bulk scale. For example, carbon nanotubes are much less chemically reactive than carbon atoms and combine the characteristics of the two naturally occurring bulk forms of carbon, strength (diamond) and electrical conductivity (graphite). The editors also would like to encourage studies that outline the general development of the main branches of physics as we know them today and even to discuss principal figures in each area. Articles discussing methodology, and reviews of the current state of knowledge and possibilities for future research, are especially welcome.

Moreover, this issue will publish reviews and research articles. There is no restriction on the length of the papers. Full experimental and methodological details, as applicable, must be provided. AJEAS is an open access peer reviewed technical journal which publishes original research contributions and is an unparalleled resource for key advances in the field of engineering. Scope of the journal includes but not limited to applied physics and applied mathematics, automation and control, biomedical engineering, chemical engineering, civil engineering, computer engineering, computer science, data engineering and software engineering, earth and environmental engineering, electrical engineering, industrial engineering and operations research, information technology and informatics, materials science, measurement and metrology, mechanical engineering, medical physics, power engineering, signal processing and telecommunications.

Manuscripts regarding original research proposals and research ideas highly appreciated. Manuscripts containing summaries and surveys on research cooperation and actual and future projects (as those founded by national governments or others) are likewise appreciated, as they provide interesting information for a broad field of users.

Topics of interest include, but are not limited to:

  1. Nanotechnologies
  2. Micro and Nano manufacturing techniques
  3. Nanocomposites
  4. Novel nanomaterials and applications
  5. Nanostructures
  6. Nanoscale materials
  7. Nanophysics
  8. Metamaterials
  9. Carbon nanotubes
  10. Smart materials
  11. Nanobiophotonics
  12. Bioinformatics
  13. Nanomedicine
  14. Biomedical systems
  15. Drug/hormone/anesthesia delivery
  16. Orthopedic engineering
  17. Telemedicine systems

Guest Editors

NameAffilation
Florian Ion Tiberiu Petrescu Senior Lecturer, Bucharest Polytechnic University, Romania
Shuhui LiAssociate Professor, The University of Alabama, United States
Jun-Wei ZhaAssociate Professor, University of Science and Technology Beijing, China
MirMilad MirsayarResearcher, Texas A&M University, United States
Haisheng QianProfessor, School of Medical Engineering, Hefei University of Technology, China
Guanying ChenProfessor, Harbin Institute of Technology, China
Chandra Sekhar RoutResearcher, Indian Institute of Technology Bhubaneswar, India
Mingjun ChenProfessor, Harbin institute of Technology, China
Antonio ApicellaProfessor, Second University of Naples, Italy
Nikos D. LagarosAssistant Professor, National Technical University of Athens, Greece

Research Article

Dynamic Mechanical Properties of Fused Deposition Modelling Processed Polyphenylsulfone Material

Bolin Huang, S.H. Masood, Mostafa Nikzad, Prabhu Raja Venugopal and Adhiyamaan Arivazhagan

Pages : 1-11

DOI : 10.3844/ajeassp.2016.1.11

Published On : July 16, 2015

Electrical Properties of Cobalt Oxide/Silica Nanocomposites Obtained by Sol-Gel Technique

Gomaa A.M. Ali, Osama A. Fouad and Salah A. Makhlouf

Pages : 12-16

DOI : 10.3844/ajeassp.2016.12.16

Published On : November 18, 2015

Fabrication and Tensile Property Analysis of Polymer Matrix Composites of Graphite and Silicon Carbide as Fillers

Vikram G. Kamble and Naveen Kumar L.

Pages : 17-30

DOI : 10.3844/ajeassp.2016.17.30

Published On : December 3, 2015

Castor Oil Based Epoxy/Clay Nanocomposite for Advanced Applications

Aditi Saikia and Niranjan Karak

Pages : 31-40

DOI : 10.3844/ajeassp.2016.31.40

Published On : December 29, 2015

Large Scale Synthesis of ZnO Nanostructures of Different Morphologies through Solvent-free Mechanochemical Synthesis and their Application in Photocatalytic Dye Degradation

Raúl Sánchez Zeferino, Jesús Alberto Ramos Ramón, Ma. Eunice de Anda Reyes, Rutilo Silva González and Umapada Pal

Pages : 41-52

DOI : 10.3844/ajeassp.2016.41.52

Published On : January 16, 2016

Impact of the Edges of a Backside Diffusive Reflector on the External Quantum Efficiency of Luminescent Solar Concentrators: Experimental and Computational Approach

Mauro Pravettoni, Cristina S. Polo Lòpez and Robert P. Kenny

Pages : 53-63

DOI : 10.3844/ajeassp.2016.53.63

Published On : January 18, 2016

A Unified Approach for the Shear Buckling Design of Structural Glass Walls with Non-Ideal Restraints

Chiara Bedon and Claudio Amadio

Pages : 64-78

DOI : 10.3844/ajeassp.2016.64.78

Published On : January 22, 2016

A General Strategy to Enhance Upconversion luminescence in Rare-Earth-Ion-Doped Oxide Nanocrystals

Guanying Chen and Lei Xu

Pages : 79-83

DOI : 10.3844/ajeassp.2016.79.83

Published On : February 18, 2016

A Clean-Green Synthesis of Platinum Nanoparticles Utilizing a Pernicious Weed Lantana (Lantana Camara)

Musthafa O. Mavukkandy, Sudip Chakraborty, Tasneem Abbasi and Shahid A. Abbasi

Pages : 84-90

DOI : 10.3844/ajeassp.2016.84.90

Published On : February 23, 2016

Porosity Analysis in Porous Brass Using Dual Approaches

Ryan Yeargin, Rob Ramey and Cindy Waters

Pages : 91-97

DOI : 10.3844/ajeassp.2016.91.97

Published On : February 25, 2016

Factors Affecting Chemo-physical and Rheological Behaviour of Zr44-Ti11-Cu10-Ni10-Be25 Metal Glassy Alloy Supercooled Liquids

Apicella Antonio and Aversa Raffaella

Pages : 98-106

DOI : 10.3844/ajeassp.2016.98.106

Published On : February 25, 2016

Literature Review

Rapid Entire Body Assessment: A Literature Review

Dima Al Madani and Awwad Dababneh

Pages : 107-118

DOI : 10.3844/ajeassp.2016.107.118

Published On : February 26, 2016

Scanning Electron Microscopic Evaluation of Self-Compacting Concrete Spalling at Elevated Temperatures

Mahmoud B. Alhasanat, Arabi N. Al Qadi, Omar A. Al Khashman and Ahmad Dahamsheh

Pages : 119-127

DOI : 10.3844/ajeassp.2016.119.127

Published On : March 7, 2016

Infiltration of Nanoparticles into Porous Binder Jet Printed Parts

Amelia Elliott, Sarah AlSalihi, Abbey L. Merriman and Mufeed M. Basti

Pages : 128-133

DOI : 10.3844/ajeassp.2016.128.133

Published On : March 11, 2016

Investigating the Role of Fly Ash and Silica Fume in the Cement Hydration Process

Lucas Suarez, Taher M. Abu-Lebdeh, Miguel Picornell and Sameer A. Hamoush

Pages : 134-145

DOI : 10.3844/ajeassp.2016.134.145

Published On : March 12, 2016

The Use of Nano Silica for Improving Mechanical Properties of Hardened Cement Paste

Intisar Kuli, Taher M. Abu-Lebdeh, Elham H. Fini and Sameer A. Hamoush

Pages : 146-154

DOI : 10.3844/ajeassp.2016.146.154

Published On : March 13, 2016

Dissolution Sintering Technique to Create Porous Copper with Sodium Chloride Using Polyvinyl Alcohol Solution through Powder Metallurgy

Cynthia Waters, Stephen Ajinola and Mustafa Salih

Pages : 155-165

DOI : 10.3844/ajeassp.2016.155.165

Published On : March 13, 2016

Effect of Nano Silica on the Compressive Strength of Harden Cement Paste at Different Stages of Hydration

Justin Montgomery, Taher M. Abu-Lebdeh, Sameer A. Hamoush and Miguel Picornell

Pages : 166-177

DOI : 10.3844/ajeassp.2016.166.177

Published On : March 13, 2016

Investigating Effects of Water Conditioning on the Adhesion Properties of Crack Sealant

Ahmed Lamarre, Elham H. Fini and Taher M. Abu-Lebdeh

Pages : 178-186

DOI : 10.3844/ajeassp.2016.178.186

Published On : March 14, 2016