Description
American Journal of Engineering and Applied Sciences, an international journal publishes four times a year in print and electronic form. AJEAS is a peer reviewed technical journal publishes original research contributions and is an unparalleled resource for key advances in the field of engineering. Scope of the journal includes but not limited to applied physics and applied mathematics, automation and control, biomedical engineering, chemical engineering, civil engineering, computer engineering, computer science, data engineering and software engineering, earth and environmental engineering, electrical engineering, industrial engineering and operations research, information technology and informatics, materials science, measurement and metrology, mechanical engineering, medical physics, power engineering, signal processing and telecommunications.
Volume 3, Issue 1
Effect of Polypropylene Fibers on the California Bearing Ratio of Air Cured Stabilized Tropical Peat Soil
Pages : 1-6
DOI : 10.3844/ajeassp.2010.1.6
Published On : March 31, 2010
Production Scheduling for Dispatching Ready Mixed Concrete Trucks Using Bee Colony Optimization
Pages : 7-14
DOI : 10.3844/ajeassp.2010.7.14
Published On : March 31, 2010
Application of Intelligence Based Genetic Algorithm for Job Sequencing Problem on Parallel Mixed-Model Assembly Line
Pages : 15-24
DOI : 10.3844/ajeassp.2010.15.24
Published On : March 31, 2010
On-Chip Implementation of High Resolution High Speed Floating Point Adder/Subtractor with Reducing Mean Latency for OFDM
Pages : 25-30
DOI : 10.3844/ajeassp.2010.25.30
Published On : March 31, 2010
Spiral Wound Reverse Osmosis Membranes for the Recovery of Phenol Compounds-Experimental and Parameter Estimation Studies
Pages : 31-36
DOI : 10.3844/ajeassp.2010.31.36
Published On : March 31, 2010
Seismic Response Evaluation of Moment Resistant Frame with Built-Up Column Section
Pages : 37-41
DOI : 10.3844/ajeassp.2010.37.41
Published On : March 31, 2010
New Control Technique Applied in Dynamic Voltage Restorer for Voltage Sag Mitigation
Pages : 42-48
DOI : 10.3844/ajeassp.2010.42.48
Published On : March 31, 2010
Fixed-Star Tracking Attitude Control of Spacecraft Using Single-Gimbal Control Moment Gyros
Pages : 49-55
DOI : 10.3844/ajeassp.2010.49.55
Published On : March 31, 2010
Anisotropy Influence of Cubic Solid on Dynamic Hertzian Contact Stiffness for a Vibrating Rigid Indenter
Pages : 56-63
DOI : 10.3844/ajeassp.2010.56.63
Published On : March 31, 2010
Electrical and Optical Properties of N, N`-Bis (Inaphthyl)-N,N`-Diphenyl-1,1`-Biphenyl-4,4`-Diamine as Hole Transport Layer in Organic Light Emitting Devices
Pages : 64-67
DOI : 10.3844/ajeassp.2010.64.67
Published On : March 31, 2010
Analysis of Comparison between Unconfined and Confined Condition of Foamed Concrete Under Uni-Axial Compressive Load
Pages : 68-72
DOI : 10.3844/ajeassp.2010.68.72
Published On : March 31, 2010
Sustainability of Rainwater Harvesting Systems in Multistorey Residential Buildings
Pages : 73-82
DOI : 10.3844/ajeassp.2010.73.82
Published On : March 31, 2010
Comparative Study of Different Underfill Material on Flip Chip Ceramic Ball Grid Array Based on Accelerated Thermal Cycling
Pages : 83-89
DOI : 10.3844/ajeassp.2010.83.89
Published On : March 31, 2010
Fuel and Greenhouse Gas Emission Reduction Potentials by Appropriate Fuel Switching and Technology Improvement in the Canadian Electricity Generation Sector
Pages : 90-97
DOI : 10.3844/ajeassp.2010.90.97
Published On : March 31, 2010
Single Beam Z-Scan Measurements of Nonlinear Refraction and Nonlinear Absorption Coefficients in Silver Nano-Fluid
Pages : 98-101
DOI : 10.3844/ajeassp.2010.98.101
Published On : March 31, 2010
Optimization of Cutting Parameters Based on Surface Roughness and Assistance of Workpiece Surface Temperature in Turning Process
Pages : 102-108
DOI : 10.3844/ajeassp.2010.102.108
Published On : March 31, 2010
Repairing and Strengthening of an Existing Reinforced Concrete Building: A North Cyprus Perspective
Pages : 109-116
DOI : 10.3844/ajeassp.2010.109.116
Published On : March 31, 2010
Mobile Phone Base Station Radiation Study for Addressing Public Concern
Pages : 117-120
DOI : 10.3844/ajeassp.2010.117.120
Published On : March 31, 2010
Electronic Design Automation Using Object Oriented Electronics
Pages : 121-127
DOI : 10.3844/ajeassp.2010.121.127
Published On : March 31, 2010
AC Analysis of PEO10LiCF3SO3 Polymeric Material for Memory Storage Application
Pages : 128-132
DOI : 10.3844/ajeassp.2010.128.132
Published On : March 31, 2010
Confined High Strength Concrete Columns: An Experimental Study
Pages : 133-137
DOI : 10.3844/ajeassp.2010.133.137
Published On : March 31, 2010
A Novel Transporting System Model for Oil Refinery
Pages : 138-143
DOI : 10.3844/ajeassp.2010.138.143
Published On : March 31, 2010
A Dynamic Voltage Restorer for Voltage Sag Mitigation in a Refinery with Induction Motors Loads
Pages : 144-151
DOI : 10.3844/ajeassp.2010.144.151
Published On : March 31, 2010
Energetic Performances Study of an Integrated Collector Storage Solar Water Heater
Pages : 152-158
DOI : 10.3844/ajeassp.2010.152.158
Published On : March 31, 2010
Simulation of Airflow and Aerodynamic Forces Acting on a Rotating Turbine Ventilator
Pages : 159-170
DOI : 10.3844/ajeassp.2010.159.170
Published On : March 31, 2010
Low-doping Effects of Nanostructure ZnO: Sn tin films annealed at different temperature in Nitrogen ambient to be applied as an Anti-reflecting coating (ARC)
Pages : 171-179
DOI : 10.3844/ajeassp.2010.171.179
Published On : March 31, 2010
Reflectivity of Reflectarrays Based on Dielectric Substrates
Pages : 180-185
DOI : 10.3844/ajeassp.2010.180.185
Published On : March 31, 2010
A Study of Sugarcane Leaf-Removal Machinery during Harvest
Pages : 186-188
DOI : 10.3844/ajeassp.2010.186.188
Published On : March 31, 2010
A Novel Low-Power CMOS Operational Amplifier with High Slew Rate and High Common-Mode Rejection Ratio
Pages : 189-192
DOI : 10.3844/ajeassp.2010.189.192
Published On : March 31, 2010
Identification of Instabilities of the Chip Formation and It’s Prediction Model During End Milling of Medium Carbon Steel (S45C)
Pages : 193-200
DOI : 10.3844/ajeassp.2010.193.200
Published On : March 31, 2010
Hardware Implementation of Truncated Multipliers Using Spartan-3AN, Virtex-4 and Virtex-5 FPGA Devices
Pages : 201-206
DOI : 10.3844/ajeassp.2010.201.206
Published On : March 31, 2010
Modification Approach of Fuzzy Logic Model for Predicting of Cutting Force When Machining Nickel Based Hastelloy C-276
Pages : 207-213
DOI : 10.3844/ajeassp.2010.207.213
Published On : March 31, 2010
Fiber Optic Sensors for Transportation Infrastructural Health Monitoring
Pages : 214-221
DOI : 10.3844/ajeassp.2010.214.221
Published On : March 31, 2010
Rating of Spur Gear Strength Using Photoelasticity and the Finite Element Method
Pages : 222-231
DOI : 10.3844/ajeassp.2010.222.231
Published On : March 31, 2010
A Review of Constitutive Models for Rubber-Like Materials
Pages : 232-239
DOI : 10.3844/ajeassp.2010.232.239
Published On : March 31, 2010