Development of Wireless Electric Concept Powering Electrical Appliances
- 1 Universiti Teknologi PETRONAS, Malaysia
Abstract
This study presents a concept of harvesting and transferring energy to a low power electrical appliances using wireless technology where interconnecting wires are not available. This study was a ground work for the future alternative energy supply especially to the areas where supplying direct energy is a challenge such as in deep sea exploration as well as to the area where power interruption is a problem. Research was carried out to study how the waste signal and energy in the air could be collected and converted into useful energy which later could be used to supply power to electrical appliances. The approach of this research started by simulation work using PSPICE full edition that was performed to develop the design and later was used as guidelines in developing the prototype. We then harvested the Radio Frequency (RF) signal that was available in air by using RF energy harvesting circuit. This circuit harvested the energy and converted them into electricity. It was accomplished by using an antenna to capture the RF energy and a voltage doublers circuit to convert and magnify the AC input signal to larger DC output. For a start we managed to capture a 3V voltage which was stored in a rechargeable battery. The energy in this rechargeable battery was then utilized to power up low-powered electrical appliances. Germanium and Silicon diodes have been used to harvest and amplify the voltage so that a better and higher output can be achieved.
DOI: https://doi.org/10.3844/ajeassp.2008.12.15
Copyright: © 2008 Hanita Daud, Noorhana Yahya, Azizuddin A. Aziz and Mohd Fadzzrul Jusoh. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
- 3,668 Views
- 2,985 Downloads
- 0 Citations
Download
Keywords
- Radio frequency (RF)
- voltage doublers
- charge-pump circuit
- energy harvesting circuit