AJEAS Cover
Frequency: Quarterly
ISSN: 1941-7020 (Print)
ISSN: 1941-7039 (Online)
Research Article Open Access

Three-Dimensional in Bonded Joints: A Short Review

Filippo Berto1, Relly Victoria V. Petrescu2 and Florian Ion T. Petrescu2
  • 1 NTNU, Norway
  • 2 Bucharest Polytechnic University, Romania

Abstract

Distributions of stress 3D in the vicinity of the overlapping corners of joints with a single lap were investigated with accuracy at present the man. A (Fe), model accurately Finite Element 3D has been carried out in order to investigate the intensity of the stress of adjustments in the plan and outside of stress by the width of the plate. The influences of the thickness of the adhesive and the Poisson distribution have been taken into account. Numerical results showed the presence of modes engaged has been detected with precision a sudden rise in the way the out-of-plan is very close to the free surface side of the fitting.

American Journal of Engineering and Applied Sciences
Volume 9 No. 4, 2016, 1261-1268

DOI: https://doi.org/10.3844/ajeassp.2016.1261.1268

Submitted On: 20 October 2016 Published On: 31 December 2016

How to Cite: Berto, F., Petrescu, R. V. V. & Petrescu, F. I. T. (2016). Three-Dimensional in Bonded Joints: A Short Review. American Journal of Engineering and Applied Sciences, 9(4), 1261-1268. https://doi.org/10.3844/ajeassp.2016.1261.1268

Open AccessCopyright: © 2016 Filippo Berto, Relly Victoria V. Petrescu and Florian Ion T. Petrescu. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

  • 3,061 Views
  • 1,676 Downloads
  • 3 Citations

Download

Keywords

  • Finite Element Analysis
  • 3d Model
  • Lap Joint
  • Notch Stress Intensity Factors