American Journal of Engineering and Applied Sciences

Research Article

A Review of the Fatigue Strength of Load Carrying Shear Welded Joints

Pages : 1-12

DOI : 10.3844/ajeassp.2017.1.12

Published On : January 2, 2017

The Optimization of a Porous Ti6Al4V Bone Construct Using Additive Manufacturing

Pages : 13-19

DOI : 10.3844/ajeassp.2017.13.19

Published On : January 2, 2017

Biodegradation of BTEX: Optimization through Response Surface Methodology

Pages : 20-31

DOI : 10.3844/ajeassp.2017.20.31

Published On : January 3, 2017

Blind Pre-Coder for MIMO System Capacity Enhancement

Pages : 43-50

DOI : 10.3844/ajeassp.2017.43.50

Published On : January 11, 2017

Sparse Representation Tracking with Auxiliary Adaptive Appearance Models

Pages : 51-58

DOI : 10.3844/ajeassp.2017.51.58

Published On : January 14, 2017

Numerical Simulation of Flexural-tensile Properties of Reinforced Concrete Beam

Pages : 59-68

DOI : 10.3844/ajeassp.2017.59.68

Published On : January 25, 2017

High-Speed for Data Transmission in GSM Networks Based on Cognitive Radio

Pages : 69-77

DOI : 10.3844/ajeassp.2017.69.77

Published On : February 3, 2017

Numerical Study on the Influence of Fault on the Seepage and Stress Field of Formation

Pages : 94-100

DOI : 10.3844/ajeassp.2017.94.100

Published On : February 9, 2017

High Performance and Low Leakage 3DSOI Fin-FET SRAM

Pages : 101-107

DOI : 10.3844/ajeassp.2017.101.107

Published On : February 9, 2017

The Use of Genetic Optimization for Design of Small Diesel-Battery Submarine

Pages : 108-113

DOI : 10.3844/ajeassp.2017.108.113

Published On : February 18, 2017

An NPV Optimization Model for Closed-Loop Supply Chain Network Design and Planning

Pages : 114-125

DOI : 10.3844/ajeassp.2017.114.125

Published On : February 18, 2017

Low Power Multiplier by Effective Capacitance Reduction

Pages : 126-133

DOI : 10.3844/ajeassp.2017.126.133

Published On : February 22, 2017

Design and Simulation of Novel Gated Integrator for the Heavy ion Beam Monitors System

Pages : 134-141

DOI : 10.3844/ajeassp.2017.134.141

Published On : February 27, 2017

Investigation

A Conceptualization of Distributed Computation for Machine Learning: The Voting Algorithm

Pages : 151-155

DOI : 10.3844/ajeassp.2017.151.155

Published On : March 2, 2017

New Strategy to Optimize Lean Supply Chain Design by Meta-Heuristic

Pages : 156-164

DOI : 10.3844/ajeassp.2017.156.164

Published On : March 9, 2017

Biodegradation of 2, 4 Dichlorophenol

Pages : 175-191

DOI : 10.3844/ajeassp.2017.175.191

Published On : March 12, 2017

Developing and Testing Dynamic Models for HVAC Systems Using System Identification Approach

Pages : 192-199

DOI : 10.3844/ajeassp.2017.192.199

Published On : March 15, 2017

Something about the Balancing of Thermal Motors

Pages : 200-217

DOI : 10.3844/ajeassp.2017.200.217

Published On : March 15, 2017

Development of a Dashboard for a Local Food Bank

Pages : 218-228

DOI : 10.3844/ajeassp.2017.218.228

Published On : March 16, 2017

Yield at Thermal Engines Internal Combustion

Pages : 243-251

DOI : 10.3844/ajeassp.2017.243.251

Published On : March 20, 2017

Velocities and Accelerations at the 3R Mechatronic Systems

Pages : 252-263

DOI : 10.3844/ajeassp.2017.252.263

Published On : March 20, 2017

Understanding Hybrid Additive Manufacturing of Functional Devices

Pages : 264-271

DOI : 10.3844/ajeassp.2017.264.271

Published On : March 20, 2017

Anthropomorphic Solid Structures n-R Kinematics

Pages : 279-291

DOI : 10.3844/ajeassp.2017.279.291

Published On : March 30, 2017

Integration of Human Factor in Design Ergonomics: Example of a High Speed Train Cabin Design

Pages : 292-297

DOI : 10.3844/ajeassp.2017.292.297

Published On : March 30, 2017