American Journal of Engineering and Applied Sciences

Geometrical Synthesis of the Distribution Mechanisms

Florian Ion T. Petrescu

DOI : 10.3844/ajeassp.2015.63.81

American Journal of Engineering and Applied Sciences

Volume 8, Issue 1

Pages 63-81

Abstract

In this study the author presents shortly some few original trigonometric methods to make the synthesis of some main distribution mechanisms. One presents four main modules of distribution mechanisms, with rotary cam and translated or rotated tappet plane or with roll, used with priority at the distribution mechanisms from the heat engines with internal combustion. These types of distribution mechanisms can improve the changes of gases and may decrease significantly the level of vibration, noises and emissions. As long as we produce electricity and heat by burning fossil fuels is pointless to try to replace all thermal engines with electric motors, as loss of energy and pollution will be even larger. However, it is well to continuously improve the thermal engines, to reduce thus fuel consumption. At the heat engine with internal combustion a great loss of power is realized and by the distribution mechanism, reason for that we must try to improve the functionality of this mechanism. The synthesis of these types of distribution mechanisms can be made shortly by the Cartesian coordinates, but to determine these coordinates we need and some trigonometric parameters of the mechanisms.

Copyright

© 2015 Florian Ion T. Petrescu. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.