American Journal of Applied Sciences

Finite Element Analysis of the Crack Propagation for Solid Materials

Miloud Souiyah, A. Muchtar, Abdulnaser Alshoaibi and A. K. Ariffin

DOI : 10.3844/ajassp.2009.1396.1402

American Journal of Applied Sciences

Volume 6, Issue 7

Pages 1396-1402

Abstract

Problem statement: The use of fracture mechanics techniques in the assessment of performance and reliability of structure is on increase and the prediction of crack propagation in structure play important part. The finite element method is widely used for the evaluation of SIF for various types of crack configurations. Source code program of two-dimensional finite element model had been developed, to demonstrate the capability and its limitations, in predicting the crack propagation trajectory and the SIF values under linear elastic fracture analysis. Approach: Two different geometries were used on this finite element model in order, to analyze the reliability of this program on the crack propagation in linear and nonlinear elastic fracture mechanics. These geometries were namely; a rectangular plate with crack emanating from square-hole and Double Edge Notched Plate (DENT). Where, both geometries are in tensile loading and under mode I conditions. In addition, the source code program of this model was written by FORTRAN language. Therefore, a Displacement Extrapolation Technique (DET) was employed particularly, to predict the crack propagations directions and to, calculate the Stress Intensity Factors (SIFs). Furthermore, the mesh for the finite elements was the unstructured type; generated using the advancing front method. And, the global h-type adaptive mesh was adopted based on the norm stress error estimator. While, the quarter-point singular elements were uniformly generated around the crack tip in the form of a rosette. Moreover, make a comparison between this current study with other relevant and published research study. Results: The application of the source code program of 2-D finite element model showed a significant result on linear elastic fracture mechanics. Based on the findings of the two different geometries from the current study, the result showed a good agreement. And, it seems like very close compare to the other published results. Conclusion: A developed a source program of finite element model showed that is capable of demonstrating the SIF evaluation and the crack path direction satisfactorily. Therefore, the numerical finite element analysis with displacement extrapolation method, had been successfully employed for linear-elastic fracture mechanics problems.

Copyright

© 2009 Miloud Souiyah, A. Muchtar, Abdulnaser Alshoaibi and A. K. Ariffin. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.