American Journal of Applied Sciences

Simulink Model of Direct Torque Control of Induction Machine

H.F. Abdul Wahab and H. Sanusi

DOI : 10.3844/ajassp.2008.1083.1090

American Journal of Applied Sciences

Volume 5, Issue 8

Pages 1083-1090

Abstract

Direct torque control (DTC) is one of the most excellent control strategies of torque control in induction machine. It is considered as an alternative to the field oriented control (FOC) or vector control technique. These two control strategies are different on the operation principle but their objectives are the same. They aim to control effectively the torque and flux. Torque control of an induction machine based on DTC strategy has been developed and a comprehensive study is present in this research. The performance of this control method has been demonstrated by simulations performed using a versatile simulation package, Matlab/Simulink. Several numerical simulations have been carried out in a steady state and transient operation on a speed control mode.

Copyright

© 2008 H.F. Abdul Wahab and H. Sanusi. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.